Welcome to Burtons Veterinary Products

Quick Order

Burtons IVY Infusion Pump -Offer Package

Stock Code: 129-400-offerpackage

Regular Price: £819.00

Special Price: £599.00

Part of Burtons Infusion Perfection Range

Offer package includes Ivy Infusion Pump, ET-TF Infusion Warmer, 25 Giving Sets!

Burtons IVY Infusion Pump -Offer Package


Ivy Veterinary Infusion Pump Offer Package

Offer package includes: Ivy Infusion Pump, ET-TF Infusion Warmer & 25 x Giving Sets 

Ivy Veterinary Infusion Pump

Our Infusion Perfection range is a selection of affordable, veterinary specific, high-quality products and consumables. The range is fully supported and can be calibrated by Burtons in-house service department

Features & Functions

Compact design

• The compact and lightweight design saves space but also incorporates a Large colourful LCD display

Added safety

• The built-in flow stop feature helps reduce the risk of accidental free flow prevent free flow when pump door is open.

Anti-bolus function

• Diminishes the volume of unwanted Bolus injected to the patient after removal of the occlusion cause.
• Anti-reverse rotation detection

Panel Lock

• The panel lock feature helps prevent unauthorised changes to any instrument setting

User-friendly operation

• Soft key design, easy to operate
• Load directly the last infusion rate and volume limit
• Adjustable buzzer volume (3 levels)
• Top indicator light reflects the operation status as well as alarm case
• Night mode(key tone off screen dimmed, top indicator light off) to ensure good rest of removable pump body for easy cleaning

Versatile functions

• 2000 history records - Real time display
• 90° rotation pole clamp convenient for horizontal bar, vertical IV pole & platform use


Flow rate range: 0.1~1220ml/h Micro mode: 0.1-99.9 ml/hr in 0.1 ml increments
Volume to be infused(VTBI): ±5%
Volume Infused (Σ): 0~36000ml
Infusion accuracy: ±5%
Applicable infusion set: Support a wide variety brands of infusion set including major manufacturers & selected local brands
KVO rate: 1~5 ml/h
Bolus rate:  300~1200 ml/h
Purge: 600ml/h
Air bubble detection:  Ultrasound sensor detection with four levels of air in line alarm, adjustable
Occlusion pressure: 3 adjustable occlusion pressure settings: low, middle and high
Alarms: Visual and audible alarms: Door open, Air-In-Line, Occlusion, Infusion completion, infusion near over, Start reminder function, Low Battery, Battery depleted, malfunction etc.
History records:   2000 history records
Power supply:  AC:100~240V,50/60Hz DC:12V ±1V
Battery: Rechargeable lithium polymer battery,7.4V,2100mAh (Can operate for more than 3 hours after fully charged at 25ml/h.)
Battery recharge time:  10h with power on, 3h with power off
Power consumption: 25VA
Classification: Class I, type CF
Waterproof Level  IP×3
Dimensions:  145×100×120 mm length×width×height
Weight  <1.4kg 
Operating Conditions  Temperature: 5 °~40°,relative humidity:10~95%, Atmosphere pressure:86106kPa
Transport conditions Temperature-20°~+60°,relative humidity:10~95%,Atmosphere pressure:50106kPa
Storage conditions  Temperature-20°~+45°,relative humidity:10~95%,Atmosphere pressure:50106kPa


ET-TF Infusion Warmer

ET-TF-II Infusion Fluid Warmer is an indirect heating device (dry heat warmer) and can be used repeatedly with standard IV infusion tubing set. The transfused fluid is heated up while passing through the infusion tube which is placed in‘S’shaped channel on the heating plate of the warmer. ET-TF-II is reliable and easy to use in various clinic sites.

  • Portable and easy to use.  
  • No special training is required.
  • Setup can be finished in 1 minute at most.
  • High accurate digital control for temperature.
  • Infusion fluid is regulated automatically to the set temperature in short time.
  • Acoustic and visible alarming mechanism prevents from over-temperature; automatic power cut-out protects the patient from overheat of fluid.
  • Saving your cost because no special disposable sets are needed. ET-TF-II is just used with standard I.V. tubing.
  • Routine transfusion. 
  • Low flow rate infusion in ICU.
  • Transfusion exchange
  • High-calorie infusion



 Tube Size
 Flow Rate
 2~12ml/min (against temperature span: 25℃~41℃)
 220V±23V (AC) Max. 70W  50±2%Hz
 Class I / Type B
 Operation Conditions
 5~40℃; Relative humidity: ≤ 80%
 Packing Dimension


Product Attachments

View FileIVY Infusion Calibration Guide    Size: (214.28 KB)

IVY Infusion Calibration Guide